Testing the SAM R21 Xplained Pro

Posted By on Apr 22, 2015 | 5 comments


These are a few tests I made with the SAM R21 Xplained Pro and an Xbee. The examples were generated from the Atmel Studio IEEE 802.15.4 MAC Wireless Wizard, with a few extra modifications (since they did not compile). The entire Atmel Studio projects used are available in the download area (tested with ASF v3.22.0).

The tests include: sending, sending and receiving, reading LQI, and transmitting values read from the ADC.

 

 

Downloads

 

Download

5 Comments

  1. Hi,

    Thanks for your tutorial (SAMR21 IEEE 802.15.4 MAC Demo), It was amazing !!!

    Please upload more Demos for ATSAMR21 + XBee S2C

    Post a Reply
  2. Hi Rafael,
    may you help me, do you know if samr21 is able to talk with
    a xbee serie 2 ? I’m not being able to communicate with it.

    Post a Reply
    • Yes it’s possible. That’s what this post shows (I guess). Do you have any specific details as to what is happening when you try?

      Post a Reply
  3. Nice work, do you know if the XBEE PRO S1 can communicate with the SAM R21 Xplained Pro?

    Post a Reply
    • I’ve never tried the Xbee Pro. My understanding was that the difference with a regular Xbee was the range (the protocol was the same). If that’s true, then, they should be able to communicate just fine.

      Post a Reply

Leave a Reply to BrutalBirdie Cancel reply

Your email address will not be published. Required fields are marked *